.Left-mouse click to hear the file. If you want to put it
on a floppy go to step #2.
Right-mouse click and select "Save Target as "
Click the down arrow on the right side of the "Save
in" text window
Select 3 1/2 Floppy(A:) - Insert a floppy, either DD or
HD (does not need PR300 formatting)
Left mouse click the "Save" button
Take the floppy disk to your PR300
Select the song you have just saved
Press "Play" and watch the registrations light
up and hear the organ play
To save the registrations, reset the selection to the
beginning
Press CANCEL on the organ, then press "Play"
Stop the PR300 as soon as the registrations light up.
Now press the memory level you wish to use
While holding SET press the memory piston you want to
save the registrations on.
Now you have the suggested registrations saved in a
memory piston. Now to perform the selection you simply
press the memory piston and play. At a later time you may
play the selection again from the floppy disk in the PR300
if you want to hear the whole selection played for you.
SPECIAL NOTE: The MIDI pistons do not light up so you
will not be able to tell what they are from the organ.
Use the "Sound" button on top of the PR300 and
select the "Part #" to see what is playing
Part 1 = MIDI GT, Part 2 = MIDI SW, Part 3 = MIDI PD